Solid-State Variable Fiber Optical Time Delay(SSOTD)
Solid-State Variable Fiber Optical Time Delay(SSOTD)
The SSOTD Series Photonic Time Delay provides a variable time delay over a long range up to the millisecond. This is accomplished by selectively routing optical signals through N fiber segments whose lengths increase successively by a power of 2. Since each switching element allows the signal to either connect or bypass a fiber segment, a delay T may be inserted, which can take any value (in increments of DT) up to the maximum value T. This is achieved using non-mechanical configuration and activated via an electrical control signal. Latching operation preserves the selected optical path after the drive signal has been removed. The solid-state configuration eliminates the need for mechanical movement and organic materials.
The device is designed to meet the most demanding switching requirements of ultrahigh reliability and fast response time.
*:Loss of each group of bits
Dimension (mm) 4Bit
The SSOTD Series Photonic Time Delay provides a variable time delay over a long range up to the millisecond. This is accomplished by selectively routing optical signals through N fiber segments whose lengths increase successively by a power of 2. Since each switching element allows the signal to either connect or bypass a fiber segment, a delay T may be inserted, which can take any value (in increments of DT) up to the maximum value T. This is achieved using non-mechanical configuration and activated via an electrical control signal. Latching operation preserves the selected optical path after the drive signal has been removed. The solid-state configuration eliminates the need for mechanical movement and organic materials.
The device is designed to meet the most demanding switching requirements of ultrahigh reliability and fast response time.
- Features
- 4-Bit Resolution or more
- High Speed
- Non-Mechanical
- High Reliability
- Fail-Safe Latching
- Low Insertion Loss
- Low Power Consumption
- Applications
- Phase-Array Antennas
- Instrumentation
- Specifications
Parameters | Unit | SSOTD |
wavelength | nm | 1520~1580,1280~1340 |
Insertion Loss* | dB | Typ: 0.8 Max:1.5 |
Return Loss | dB | >55 |
Crosstalk | dB | >30 |
Switch Time | us | <150 |
Repetition Rate | KHz | 1 |
Switch Type | Latching | |
Polarization Dependent Loss | dB | 0.25 |
Fiber Segment Number | Loop | <8 |
Polarization Mode Dispersion | ps | 0.15 |
Polarization Extinction Ratio(PM Fiber) | dB | >22 |
Operation Temperature | ℃ | -5~+70 |
Storage Temperature | ℃ | -40~+85 |
Weight | g | 25 |
Dimension | mm | (L)46.8×(W)17×(H)9.5(±0.2) (4Bit) (L)74.5×(W)17×(H)9.5(±0.2) (8Bit) |
- Electrical parameters
Parameters | Min. | Typical | Max. | Unit |
Switch Voltage | 2.3 | 2.5 | 3.3 | V |
Switch Current | 140 | 150 | 160 | mA |
Pulse Duration | 0.2 | 0.3 | 0.5 | ms |
- Pins 4Bit
Switch Position | Pin Group 1 | Pin Group 2 | Pin Group 3 | Pin Group 4 | Pin Group 5 | |||||
Pin 1 | Pin 2 | Pin 3 | Pin 4 | Pin 5 | Pin 6 | Pin 7 | Pin 8 | Pin 9 | Pin 10 | |
Bypass | + | - | - | + | - | + | - | + | + | - |
1-bit | - | + | + | - | - | + | - | + | + | - |
2-bit | + | - | + | - | + | - | - | + | + | - |
3-bit | + | - | - | + | + | - | + | - | + | - |
4-bit | + | - | - | + | - | + | + | - | - | + |
Dimension (mm) 4Bit
- Pins 8Bit
Switch Position | Pin Group 1 | Pin Group 2 | Pin Group 3 | Pin Group 4 | Pin Group 5 | Pin Group 6 | Pin Group 7 | Pin Group 8 | Pin Group 9 | |||||||||
Pin 1 | Pin 2 | Pin 3 | Pin 4 | Pin 5 | Pin 6 | Pin 7 | Pin 8 | Pin 15 | Pin 16 | Pin 11 | Pin 12 | Pin 13 | Pin 14 | Pin 15 | Pin 16 | Pin 17 | Pin 18 | |
Bypass | + | - | - | + | - | + | - | + | - | + | - | + | - | + | - | + | + | - |
1-bit | - | + | + | - | - | + | - | + | - | + | - | + | - | + | - | + | + | - |
2-bit | + | - | + | - | + | - | - | + | - | + | - | + | - | + | - | + | + | - |
3-bit | + | - | - | + | + | - | + | - | - | + | - | + | - | + | - | + | + | - |
4-bit | + | - | - | + | - | + | + | - | + | - | - | + | - | + | - | + | + | - |
5-bit | + | - | - | + | - | + | - | + | + | - | + | - | - | + | - | + | + | - |
6-bit | + | - | - | + | - | + | - | + | - | + | + | - | + | - | - | + | + | - |
7-bit | + | - | - | + | - | + | - | + | - | + | - | + | + | - | + | - | + | - |
8-bit | + | - | - | + | - | + | - | + | - | + | - | + | - | + | + | - | - | + |
- Dimension (mm) 8Bit
- Ordering Information: SSOTD-A-B-C-D-E-F
A | B | C | D | E | F |
Mode | Wavelength | Fiber Type | Fiber Diameter | Fiber Length | Connector |
04:4-Bit 05:5-Bit 06:6-Bit 07:7-Bit 08:8-Bit |
13: 1310nm 15: 1550nm |
SM09:SMF-28 PM13:PM1310 PM15:PM1550 |
25:250um 90:900um |
05:0.5m 10:1.0m 15:1.5m |
OO:None FP: FC/PC FA: FC/APC SP: SC/PC SA: SC/APC LP: LC/PC LA: LC/APC |
Latest Posts
-
Mechanical Optical Switch is a powerful tool to improve network performance
-
Advantages of High Quality Large Port Optical Switch
-
MEMS OPTICAL SWITCH core components of optical communication networks
-
Solid-state fiber optic switches are a new choice for optical networks
-
Solid-State Variable Fiber Optical Time Delay(SSOTD)